<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom">
  <channel>
    <title>ASELL Logistics | Blog &amp; News</title>
    <link>https://www.asellogistics.com.tr/en/blog/rss.xml</link>
    <atom:link href="https://www.asellogistics.com.tr/en/blog/rss.xml" rel="self" type="application/rss+xml" />
    <description>ASELL Logistics expert notes on logistics, transport mode selection, customs and cost management.</description>
    <language>en-US</language>
    <lastBuildDate>Tue, 17 Nov 2026 00:00:00 GMT</lastBuildDate>
    <generator>ASELL Logistics</generator>
    <item>
      <title>Which cargo suits a 40 ft FCL container?</title>
      <link>https://www.asellogistics.com.tr/en/blog/40-ft-fcl-container-suitable-cargo/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/40-ft-fcl-container-suitable-cargo/</guid>
      <pubDate>Tue, 17 Nov 2026 00:00:00 GMT</pubDate>
      <category>Sea Freight</category>
      <description>Container choice is not only about volume. Load geometry, weight limits and stowage rules decide it as much.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/blog-40fcl.webp" alt="Stowage plan of palletised cargo inside a 40 ft FCL container" /><figcaption>Which cargo suits a 40 ft FCL container?</figcaption></figure><p>A fully booked (FCL) 40 ft container stands out for its volume, yet the right choice goes beyond cubic metres. The cargo&apos;s dimensions, pallet layout, weight and stowage rules determine whether a 40 ft container is actually the best fit.</p><p>This article covers the dimensions and capacity of the 40 ft container, the cargo profiles that suit it, and what to weigh up when comparing it with a 20 ft container.</p><h2>Dimensions and capacity of the 40 ft container</h2><p>A standard 40 ft DC container has internal dimensions of roughly 12.03 m length, 2.35 m width and 2.39 m height. The door opening is a few centimetres narrower than the internal cross-section, so whether cargo fits through the door should be checked separately. Volume is about 67–68 m³ and the payload limit, depending on the container&apos;s tare weight, is roughly 26–27 tonnes.</p><p>For taller cargo, the 40 ft HC (High Cube) variant raises the internal height to about 2.69 m and the volume to almost 76 m³. For light but bulky cargo, the HC option carries more goods at the same freight rate.</p><p><a href="/en/equipment-dimensions/">Our equipment dimensions page</a></p><h2>Which loads fit a 40 ft container</h2><p>Loads that run out of space before weight are the natural fit for a 40 ft container: textiles, furniture, footwear, household appliances, packaged consumer goods and light palletised industrial goods. Depending on the stowage pattern, about 24–25 standard EUR pallets (1.20 × 0.80 m) fit into a 40 ft DC.</p><p>Weight limits come from three places: the container&apos;s payload capacity, road and vehicle weight regulations in the origin and destination countries, and transit rules along the route. For dense cargo these limits can bite before the volume fills up. The cargo&apos;s centre of gravity also needs to stay balanced; weight concentrated on one side undermines handling and transport safety.</p><p>In sea freight, the verified gross mass (VGM) of the loaded container must be declared before the vessel departs. This figure is the sum of the container tare, cargo and dunnage, and it feeds the terminal&apos;s handling plan.</p><ul><li>Plan cargo with its packed dimensions and pallet layout.</li><li>Check the door clearance, especially for wide and tall pieces.</li><li>Distribute weight evenly; keep the centre of gravity centred.</li><li>Add the pre-departure VGM declaration to the plan.</li></ul><h2>Compared with the 20 ft container</h2><p>A 20 ft DC container offers about 33 m³ of volume with a payload capacity similar to the 40 ft. For dense cargo where weight fills the box before volume — metal products, bricks, paper reels, stone and the like — a 20 ft container is often the more efficient choice.</p><p>For light and bulky cargo the 40 ft container lowers the cost per cubic metre: since 40 ft freight is not double the 20 ft rate, the amount paid per m³ is generally more favourable. If your cargo exceeds 20 ft capacity but would not fill a 40 ft, it is also worth evaluating LCL instead of FCL.</p><p><a href="/en/comparisons/fcl-mi-lcl-mi/">FCL or LCL comparison</a></p><h2>How to move forward</h2><p>Evaluating container choice together with your cargo&apos;s dimensions, weight and delivery profile clarifies both freight and handling cost. You can calculate your cargo&apos;s m³ with our volume calculator, see the recommended container fill, and confirm it with our team during the quotation stage.</p><p><a href="/en/volume-calculator/">Volume calculator</a> &middot; <a href="/en/sea-freight/">Our sea freight service</a> &middot; <a href="/en/request-a-quote/">Request a freight quote</a></p>]]></content:encoded>
    </item>
    <item>
      <title>Air Freight Volumetric Weight Explained</title>
      <link>https://www.asellogistics.com.tr/en/blog/air-freight-chargeable-weight-volumetric-weight/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/air-freight-chargeable-weight-volumetric-weight/</guid>
      <pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate>
      <category>Freight Planning</category>
      <description>Compare actual and volumetric weight to estimate air-freight chargeable weight, then confirm the divisor, dimensions and rounding rules before quoting.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/air.webp" alt="Packaged cargo measured to calculate air-freight chargeable weight" /><figcaption>Air Freight Volumetric Weight Explained</figcaption></figure><p>Air-freight charges are not always calculated from the kilograms shown on a scale. A light but bulky shipment can have a higher chargeable weight because of the space it occupies on an aircraft. That is why actual weight and volumetric weight need to be compared before requesting a quote.</p><p>The volumetric calculation uses the dimensions of the shipment after packing. This guide explains the formula, a worked example and the details to confirm with the carrier. The result is an estimate, not the final freight price: the carrier&apos;s tariff and service conditions still apply.</p><h2>The volumetric-weight formula</h2><p>Measure the packed length, width and height of each piece in centimetres. Multiply the three measurements to get cubic centimetres. Divide that volume by the volumetric divisor used by the carrier; the result is the piece&apos;s volumetric weight.</p><p>For example, a piece measuring 120 × 80 × 100 cm has a volume of 960,000 cm³. With a divisor of 6,000 cm³/kg, its calculated volumetric weight is 160 kg. This example illustrates the method only; the divisor or units can vary by route and service.</p><h2>How chargeable weight is determined</h2><p>Carriers commonly use the higher of actual weight and volumetric weight as the chargeable weight. If the example piece has an actual weight of 110 kg, the 160 kg volumetric figure could be used under the example divisor. If actual weight were 190 kg, that higher figure would apply instead.</p><p>For multiple pieces, provide the dimensions and weight of each one separately. Rounding and minimum chargeable-weight rules depend on the carrier. Do not treat your own calculation as a final quote; the carrier&apos;s inspection and measurement take precedence.</p><h2>Check measurements before requesting a quote</h2><p>Measure the shipment in its packed condition, not as an unpacked product. Pallets, protective corners, carton overhang and stretch wrap can increase the outside dimensions. For an irregular package, use its outermost length, width and height.</p><p>Share the origin and destination, piece count, packed dimensions, gross weight and cargo-ready date. State pallet dimensions separately where relevant. Providing the same complete data at the start reduces the chance that a later remeasurement changes the price or loading plan.</p><ul><li>Measure every piece separately after packing.</li><li>Confirm the divisor and rounding rule with the carrier.</li><li>Compare actual weight with volumetric weight.</li><li>Attach a clear dimensions-and-weight list to the quote request.</li></ul><h2>Plan air freight around the shipment</h2><p>When considering air freight, look beyond chargeable weight to the delivery date, flight schedule, transfers and service scope at destination. Once the carrier&apos;s measurement and acceptance rules are confirmed, different transport options can be compared on the same basis.</p><p><a href="/en/air-freight/">Explore air-freight services</a> &middot; <a href="/en/volume-calculator/">Use the volume calculator</a> &middot; <a href="/en/request-a-quote/">Request an air-freight quote</a></p>]]></content:encoded>
    </item>
    <item>
      <title>Rail or Road Freight? How to Choose</title>
      <link>https://www.asellogistics.com.tr/en/blog/rail-vs-road-freight-when-to-choose/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/rail-vs-road-freight-when-to-choose/</guid>
      <pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate>
      <category>Freight Planning</category>
      <description>Compare rail and road using door-to-door time, terminal access, cargo volume and delivery flexibility—not just the line-haul rate.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/rail.jpg" alt="Containerised cargo options compared for rail and road freight" /><figcaption>Rail or Road Freight? How to Choose</figcaption></figure><p>Choosing between rail and road involves more than comparing the main carriage rates. Origin and destination, delivery date, terminal access, first- and last-mile requirements and cargo volume all change the overall plan.</p><p>Both modes depend on the route and operating conditions. Rail may suit planned flows over longer distances, while road can offer direct address access and flexibility. This comparison helps prepare the right questions before asking for a quote.</p><h2>Compare door-to-door transit time</h2><p>A rail plan needs to account not only for time on the train but also for transport to the terminal, terminal acceptance, train connections, delivery from the destination terminal and any customs steps. Service frequency and transfers can affect the total transit time.</p><p>Road can remove some terminal steps, but route conditions, border crossings, driving and rest rules, seasonal congestion and access to the delivery address still matter. Check that both quotes cover the same endpoints and service scope.</p><h2>Assess volume and cargo requirements</h2><p>For regular or high-volume shipments, rail capacity and scheduled services can be worth considering. However, where an origin or destination has no suitable terminal connection, road feeder transport is needed. Recompare the total once first- and last-mile costs are included.</p><p>Road can be more flexible for deliveries to multiple addresses, smaller batches or variable loading conditions. Cargo dimensions, gross weight, stackability, loading equipment and special requirements help determine which vehicle or equipment can be used.</p><h2>Compare quotes on the same scope</h2><p>For both modes, provide the origin and destination addresses, piece count, packed dimensions, weight, cargo-ready date and required delivery window. For rail, ask about terminal charges and feeder transport; for road, clarify border, waiting and delivery conditions.</p><p>Check where the estimated transit time starts and ends, whether customs is included and how long the quote remains valid. Without these details, a lower-looking freight line does not necessarily mean a lower total cost.</p><ul><li>Compare transit time from pickup through final delivery.</li><li>Include terminal and first-/last-mile charges.</li><li>Provide identical shipment details for both options.</li><li>Consider service frequency alongside the delivery window.</li></ul><h2>Choose for the route and the cargo</h2><p>There is no single best mode for every shipment. Clarify cargo volume, delivery date and address conditions, then compare rail and road on a door-to-door basis. Once the route is known, the practical options can be assessed more accurately.</p><p><a href="/en/rail-freight/">Rail-freight services</a> &middot; <a href="/en/road-freight/">Road-freight services</a> &middot; <a href="/en/transport-routes/turkiye-europe-rail-freight/">Türkiye–Europe rail route</a></p>]]></content:encoded>
    </item>
    <item>
      <title>Intermodal vs Multimodal Freight</title>
      <link>https://www.asellogistics.com.tr/en/blog/intermodal-vs-multimodal-freight/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/intermodal-vs-multimodal-freight/</guid>
      <pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate>
      <category>Freight Planning</category>
      <description>When a shipment uses more than one transport mode, clarify the equipment, contract and responsibility scope; terminology can depend on the agreement.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/regions.webp" alt="An intermodal freight chain connecting port, rail and road transport" /><figcaption>Intermodal vs Multimodal Freight</figcaption></figure><p>International cargo may travel by a combination of sea, road and rail before it reaches its destination. Intermodal and multimodal are often used when describing these transport chains, but their everyday use and contractual definitions are not identical in every market.</p><p>Look beyond the number of modes: consider whether the cargo stays in the same loading unit, who arranges each leg and how responsibility is set out in the contract. This guide describes operational differences; the transport contract and applicable rules determine legal responsibilities.</p><h2>How intermodal transport works</h2><p>In intermodal transport, cargo generally stays in the same loading unit as it moves between modes. A container, for example, can travel by truck to a port, by ship to another port and then by rail or truck to its final address. The goods do not need to be unpacked and reloaded at each mode change.</p><p>This approach can help limit handling and combine the strengths of different transport legs. Container availability, terminal connections, equipment fit and the schedule of each leg still need to be checked before the plan is confirmed.</p><h2>Clarify the scope of multimodal transport</h2><p>Multimodal transport also describes a shipment that uses more than one mode. In practice, it is often arranged under one transport agreement or through one coordinating operator, but the contract structure, parties&apos; responsibilities and transport documents can vary by project.</p><p>Do not assume that the term alone means one party carries every risk. Ask the quote to identify each transport leg, service provider, delivery point, claims process and applicable contract conditions.</p><h2>Which model fits the shipment?</h2><p>Keeping cargo in one container or standard loading unit can be useful when you want to limit handling. Coordinating several legs in one operational plan can help when the origin and destination are better connected by different modes.</p><p>Compare total door-to-door time and cost, terminal access, customs crossings and special handling needs. If there is no practical connection along the route, an intermodal plan on paper may not be workable in operation.</p><ul><li>List the mode and responsible party for every leg.</li><li>Ask whether the loading unit changes between modes.</li><li>Compare transport documents and delivery points.</li><li>Review contractual responsibility clauses separately.</li></ul><h2>Build one operational plan</h2><p>The right intermodal or multimodal solution depends on the route and shipment details. Share the cargo information and required delivery date to compare how the different legs affect the schedule and total cost within one plan.</p><p><a href="/en/intermodal-freight/">Intermodal-freight services</a> &middot; <a href="/en/rail-freight/">Rail-freight services</a> &middot; <a href="/en/transport-routes/">Türkiye–Europe transport routes</a></p>]]></content:encoded>
    </item>
    <item>
      <title>Reefer Cold-Chain Shipping Checklist</title>
      <link>https://www.asellogistics.com.tr/en/blog/reefer-container-cold-chain-shipping-checklist/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/reefer-container-cold-chain-shipping-checklist/</guid>
      <pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate>
      <category>Sea Freight</category>
      <description>For temperature-controlled sea freight, confirm the product range, equipment settings, airflow and loading plan before shipment.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/sea.webp" alt="Palletised goods prepared for sea freight in a temperature-controlled reefer container" /><figcaption>Reefer Cold-Chain Shipping Checklist</figcaption></figure><p>A reefer container is refrigerated equipment used for sea transport where cargo needs temperature control. Selecting a set point is only one part of the plan: the product&apos;s condition before loading, airflow, stowage and monitoring during the voyage also need attention.</p><p>Requirements differ by shipment. Do not assume one standard setting for food, pharmaceuticals or chemicals; use the product specification and carrier acceptance conditions. This checklist brings together the topics to discuss before the quote and loading stages.</p><h2>Confirm the product temperature requirements</h2><p>Obtain the acceptable temperature range in writing from the manufacturer or product owner. The set point should match the range required to protect the product. State sensitivity to freezing, temperature increases or humidity changes as well.</p><p>Assess whether the product needs pre-conditioning. A reefer should not be treated as a means of rapidly cooling warm cargo; the equipment and loading procedure depend on the product and carrier conditions. Pre-loading temperature records may provide a useful reference during the process.</p><h2>Check the equipment and airflow</h2><p>Ask whether the quoted equipment and route support the required temperature range, ventilation and humidity controls. Not every reefer has identical settings or availability. Sharing the product requirements early helps confirm suitable equipment.</p><p>Arrange cartons and pallets so they do not block air inlets and outlets. The stowage plan must follow the equipment&apos;s loading limits and airflow pattern. Packaging openings or pallet positions that obstruct circulation can affect temperature distribution.</p><h2>Prepare records, packaging and shipment details</h2><p>Keep the product description, carton or pallet count, packed dimensions, gross weight, target temperature, origin and destination consistent across the shipping instructions. Pharmaceuticals or other controlled goods may need additional documents and handling conditions; confirm these with the relevant specialists.</p><p>Recording the cargo condition at dispatch can help assess differences at delivery. If a sensor or temperature-monitoring service is required, confirm whether it is included, who will provide the records and how often the data will be shared.</p><ul><li>Confirm the product temperature range in writing.</li><li>Agree on pre-conditioning and loading procedures.</li><li>Arrange packaging and stowage to support airflow.</li><li>Clarify the monitoring and reporting scope in the quote.</li></ul><h2>Plan the cold chain across the full route</h2><p>Cold-chain planning does not stop at the ocean leg. Consider how temperature conditions will be maintained during warehouse waiting, port acceptance, transfers and customs at destination. Sailing schedules and equipment connections at arrival are also part of the shipment plan.</p><p><a href="/en/sea-freight/">Sea-freight services</a> &middot; <a href="/en/industry-solutions/food-and-agriculture-logistics/">Food and agriculture logistics</a> &middot; <a href="/en/request-a-quote/">Request a freight quote</a></p>]]></content:encoded>
    </item>
    <item>
      <title>Planning Out-of-Gauge Project Cargo</title>
      <link>https://www.asellogistics.com.tr/en/blog/out-of-gauge-project-cargo-transport-planning/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/out-of-gauge-project-cargo-transport-planning/</guid>
      <pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate>
      <category>Freight Planning</category>
      <description>For oversized or heavy cargo, coordinate measurements, route surveys, loading equipment and permits before the transport begins.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/road.jpg" alt="An out-of-gauge project load requiring special transport equipment and route planning" /><figcaption>Planning Out-of-Gauge Project Cargo</figcaption></figure><p>Out-of-gauge or heavy project cargo does not fit standard vehicle or container dimensions, or needs a special loading plan. Knowing the cargo weight alone is not enough: dimensions, centre of gravity, lifting points and route conditions all influence the transport method.</p><p>Preparation should start before the cargo is ready. This guide outlines the first information to collect and the planning steps to consider. Route permits, bridge or road restrictions and crane capacity depend on the project and country, so they must be checked by the relevant specialists.</p><h2>Collect dimensions and technical details</h2><p>Measure the outer length, width and height of the packed or transport-ready cargo. Show gross weight, centre of gravity, lifting points and permitted support areas on a technical drawing. If dimensions can change, state which configuration the measurements describe.</p><p>Provide manufacturer drawings, photographs, technical sheets and any assembly or lifting instructions. Explain whether parts can be dismantled, which surfaces are sensitive and any limits on tilting or orientation during transport.</p><h2>Plan the route survey and equipment together</h2><p>A route survey may examine access to the loading and delivery sites, road widths and turns, bridge or tunnel restrictions and required permits. The dimension and weight limits of ports, terminals and transfer points are also part of the plan.</p><p>Options such as a low-bed trailer, flat rack, open top, special trailer or project vessel can be evaluated against the cargo and route. Equipment selection depends not just on cargo dimensions but also on loading and discharge methods, lashing points and route capacity.</p><h2>Clarify the operation sequence and responsibilities</h2><p>Establish whether the loading and discharge sites need cranes, forklifts, ramps, temporary storage or site preparation. Put the responsible party for each operation, site access time and provision of equipment in writing.</p><p>Permits, customs documents, insurance conditions and delivery schedules depend on the cargo and route. Check separately whether permits, escorts, loading and discharge, port handling and cargo insurance are included in the quotation.</p><ul><li>Prepare a dimensioned technical drawing and current photos.</li><li>State the centre of gravity and lifting points.</li><li>Review route, terminal and site access in advance.</li><li>Clarify permit, equipment and operation responsibilities in writing.</li></ul><h2>Get an early plan for project cargo</h2><p>A workable out-of-gauge solution emerges when technical cargo data is assessed alongside the actual route. Sharing drawings, measurements, origin and destination points and the target date early leaves time to evaluate equipment alternatives and operating steps.</p><p><a href="/en/project-cargo/">Project-cargo services</a> &middot; <a href="/en/industry-solutions/construction-and-project-cargo-logistics/">Construction and project cargo logistics</a> &middot; <a href="/en/request-a-quote/">Request a freight quote</a></p>]]></content:encoded>
    </item>
    <item>
      <title>Sea-Freight Export Documents Checklist</title>
      <link>https://www.asellogistics.com.tr/en/blog/sea-freight-export-documents-checklist/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/sea-freight-export-documents-checklist/</guid>
      <pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate>
      <category>Sea Freight</category>
      <description>Match the commercial invoice, packing list, bill-of-lading instructions and customs details before loading to reduce document-related delays.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/customs.webp" alt="Invoice, packing list and transport documents checked for a sea-freight export" /><figcaption>Sea-Freight Export Documents Checklist</figcaption></figure><p>Accurate documents affect several steps in a sea-freight export, from booking the shipment to customs clearance and issuing the bill of lading. The required document set varies by product, country, delivery term, payment arrangement and destination requirements.</p><p>The following is a general preparation framework, not a definitive list for every product or destination. The exporter, customs broker, buyer and transport parties should confirm the applicable requirements before the shipment moves.</p><h2>Match the commercial invoice and packing list</h2><p>A commercial invoice identifies details such as seller and buyer, product description, quantity, unit and total value and currency. Keep the description consistent with the customs declaration and other documents. Delivery terms and named places should also match the sales agreement.</p><p>A packing list shows the number of cartons or pallets, packaging type, gross and net weights and, where available, package dimensions. Quantities and product descriptions should agree with the invoice. For palletised cargo, state the total and how the pallets are arranged.</p><h2>Send bill-of-lading instructions on time</h2><p>The carrier needs details such as shipper, consignee, notify party, cargo description and delivery terms to prepare the bill of lading or transport document. Before approving a draft, check names, addresses, cargo quantities, container and seal details against the available records.</p><p>Availability and process conditions for an original bill, express release or electronic document depend on the carrier, service and sales agreement. Agree on document type and release process with the parties before loading.</p><h2>Confirm customs and destination-specific documents</h2><p>Export declarations and product classification require information specific to the goods. A certificate of origin, permit, health certificate or conformity document may be required for particular products and markets. Check these requirements with your customs broker using the product and destination details.</p><p>During document preparation, keep product description, quantity, HS code, origin, party information and delivery term consistent. Reviewing drafts before the shipping date can reduce last-minute corrections and booking changes.</p><ul><li>Compare product descriptions and quantities on the invoice and packing list.</li><li>Send bill-of-lading instructions before the carrier&apos;s cut-off.</li><li>Confirm HS code, origin and delivery terms with the relevant specialists.</li><li>Check product-specific documents with the destination buyer.</li></ul><h2>Connect document preparation with the transport plan</h2><p>Set a timeline for booking, loading, export customs and document approval. Assigning who supplies each detail and by when helps transport and documentation move in parallel.</p><p><a href="/en/sea-freight/">Sea-freight services</a> &middot; <a href="/en/customs-clearance/">Customs-clearance services</a> &middot; <a href="/en/documents/">Company documents</a></p>]]></content:encoded>
    </item>
    <item>
      <title>Reefer, Open Top or Flat Rack?</title>
      <link>https://www.asellogistics.com.tr/en/blog/reefer-open-top-or-flat-rack-container/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/reefer-open-top-or-flat-rack-container/</guid>
      <pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate>
      <category>Sea Freight</category>
      <description>Choose special sea-freight equipment according to temperature, dimensions, top-loading and lashing needs, then confirm route and equipment availability.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/blog-fcl.webp" alt="Cargo dimensions reviewed to select suitable special sea-freight equipment" /><figcaption>Reefer, Open Top or Flat Rack?</figcaption></figure><p>A standard dry container is not suitable for every shipment. Temperature requirements, door clearance, top-loading needs or lashing conditions may lead to a reefer, open-top or flat-rack option.</p><p>Special-container selection is not made from the cargo type alone. Internal dimensions, door opening, payload limit, equipment availability on the route and loading and discharge options all need to be confirmed with the carrier. This guide provides a basic decision framework.</p><h2>Reefer: when temperature control is required</h2><p>A reefer container is used for cargo that needs defined temperature conditions during sea transport. State the product requirements, available temperature range and any ventilation needs in the quote request. Product pre-conditioning and packaging also form part of the operating plan.</p><p>A reefer does not automatically make every product&apos;s temperature suitable. Confirm carrier acceptance, equipment capacity and connections at origin and destination before the transport is booked.</p><h2>Open top: when loading from above is needed</h2><p>The removable roof of an open-top container can be considered where cargo needs to be loaded from above, for example by crane. Cargo height, whether it can pass through the doors and the method of covering and securing it affect the choice.</p><p>Top-loading does not mean the cargo is free from dimensional limits in every direction. Confirm cargo weight and height limits, availability on the service and the discharge method at the destination terminal.</p><h2>Flat rack: for wide or heavy cargo</h2><p>A flat rack can be assessed for cargo where side walls or a roof restrict the geometry, particularly for heavy or wide pieces. Technical review is needed for lashing points, weight distribution, lifting plans and stowage on the vessel.</p><p>For out-of-gauge cargo, route, port equipment, permits and handling conditions need to be reviewed independently of the container type. Use dimension tables as an initial check, then confirm the assigned equipment and operating plan.</p><ul><li>Share packed cargo dimensions and gross weight.</li><li>State whether side, door or top loading is required.</li><li>Explain temperature, lashing and lifting conditions.</li><li>Confirm equipment availability at origin and destination.</li></ul><h2>Select equipment for both cargo and route</h2><p>The right equipment follows from assessing cargo geometry, handling method, route and service availability together. Share drawings, photos and measurements at quotation stage to compare standard and special equipment options.</p><p><a href="/en/equipment-dimensions/">Review equipment dimensions</a> &middot; <a href="/en/sea-freight/">Sea-freight services</a> &middot; <a href="/en/project-cargo/">Project-cargo services</a></p>]]></content:encoded>
    </item>
    <item>
      <title>Air vs Sea Freight: How to Choose</title>
      <link>https://www.asellogistics.com.tr/en/blog/air-vs-sea-freight-delivery-time-cost/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/air-vs-sea-freight-delivery-time-cost/</guid>
      <pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate>
      <category>Freight Planning</category>
      <description>Compare air and sea freight using actual delivery time, chargeable weight, cargo volume and door-to-door cost.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/blog-mode.jpg" alt="Air and sea freight options compared for urgent and high-volume shipments" /><figcaption>Air vs Sea Freight: How to Choose</figcaption></figure><p>A common assumption is that air freight is fast and sea freight is economical. That is a useful starting point, but the right decision depends on the cargo dimensions, required delivery date, route and the door-to-door scope of both options.</p><p>Request comparable quotes for the same shipment using both modes. Comparing only the main transit leg or freight line can leave out pickup, terminal, customs and final-delivery steps.</p><h2>Start with the required delivery date</h2><p>Set the date when cargo will be ready and the latest acceptable delivery date. For air freight, flight schedules, acceptance cut-offs and transfer times matter. For sea freight, sailing frequency, port connections and arrival procedures add to the total timeline.</p><p>If a delay could interrupt production or deplete stock, consider its business impact as well. The extra cost of a faster option becomes meaningful when compared with the cost of a delay; that calculation depends on the shipment and the business.</p><h2>Compare volume and chargeable weight</h2><p>Air-freight pricing can compare actual and volumetric weight. Dimensions can increase chargeable weight more than expected for light, bulky cargo. At sea, the choice between FCL and LCL depends on shipment volume, equipment and the consolidation plan.</p><p>Provide the same packed dimensions and weights for both options. For sea freight, review container and terminal charges; for air freight, check chargeable weight, flight connections and destination charges separately.</p><h2>Compare quotes door to door</h2><p>Check whether pickup, export and import customs, terminal handling, insurance and final delivery are included in each quote. An air quote may cover airport to airport, while a sea quote may be port to port; total prices are not comparable until the scope is aligned.</p><p>If cargo needs special handling, temperature control or dangerous-goods procedures, confirm carrier acceptance for each mode. In some cases, shipping the urgent portion by air and the remaining cargo by sea can also be evaluated.</p><ul><li>Share the cargo-ready date and required delivery date.</li><li>Provide packed dimensions and gross weight.</li><li>Align the pickup and delivery scope of both quotes.</li><li>Check transfers, customs and destination charges separately.</li></ul><h2>Choose the mode for the shipment</h2><p>Assess air and sea freight by delivery date, cargo characteristics and total cost. Once cargo details and addresses are clear, comparing options on the same scope helps avoid basing the decision on a single freight figure.</p><p><a href="/en/air-freight/">Air-freight services</a> &middot; <a href="/en/sea-freight/">Sea-freight services</a> &middot; <a href="/en/comparisons/deniz-tasimaciligi-mi-kara-tasimaciligi-mi/">Sea versus road freight comparison</a></p>]]></content:encoded>
    </item>
    <item>
      <title>LCL Packaging and Labelling Checklist</title>
      <link>https://www.asellogistics.com.tr/en/blog/lcl-shipment-packaging-labeling-checklist/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/lcl-shipment-packaging-labeling-checklist/</guid>
      <pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate>
      <category>Sea Freight</category>
      <description>For consolidated sea freight, match packaging to handling and stowage needs and keep dimensions, piece details and labels consistent with shipping documents.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/warehouse.webp" alt="A labelled palletised shipment packed for LCL sea freight" /><figcaption>LCL Packaging and Labelling Checklist</figcaption></figure><p>In an LCL shipment, cargo shares container capacity with other shipments. Consolidation and separation at destination can involve more than one handling step. Suitable packaging and clear piece information help the shipment be planned and identified during handling.</p><p>Packaging should reflect product fragility, weight, stackability and the transport process. This checklist covers general preparation points; for special products, follow the manufacturer or relevant packaging specialist&apos;s instructions.</p><h2>Choose packaging for the cargo</h2><p>A carton or crate should protect the product against normal pressure during transport and handling. For heavy items, check that the base supports the load; for fragile goods, make sure internal cushioning limits movement. Special rules for liquids or regulated cargo also apply where relevant.</p><p>On a pallet, the cargo should not overhang the base unless the overhang is clearly stated. Stretch wrap alone is not structural restraint; secure the relationship between the product, cartons and pallet to suit the load&apos;s weight and shape.</p><h2>Keep labels and piece details consistent</h2><p>Each carton or pallet should have readable identifying details such as shipper and consignee, piece number and total piece count. If handling marks for orientation, fragility or stacking are used, make sure they match the actual loading instructions.</p><p>Piece count and shipment reference on the labels should match the packing list and shipping instructions. If there are different products or pallet types, identify each group separately. Photographs can help document the condition of the packaging before loading.</p><h2>Share dimensions, weight and stacking details</h2><p>Provide packed length, width and height for each piece, gross weight and whether it is palletised. Stackability, maximum top load and special handling requirements can affect placement at the consolidation centre. List different sizes separately instead of using an average.</p><p>State any temperature-control, dangerous-goods, humidity or loading-direction requirements at quotation stage. These details allow the carrier to check whether the equipment and acceptance conditions are suitable.</p><ul><li>Select packaging for the cargo weight and handling method.</li><li>Measure outer dimensions including pallet and packaging.</li><li>Match labels and quantities to the packing list.</li><li>State stackability and any special handling requirements.</li></ul><h2>Prepare an LCL shipment for transport</h2><p>Once packaging and piece details are complete, suitability for partial-load transport, consolidation and the delivery schedule can be assessed more clearly. Compare LCL with FCL using total cost and service scope.</p><p><a href="/en/comparisons/fcl-mi-lcl-mi/">FCL versus LCL comparison</a> &middot; <a href="/en/sea-freight/">Sea-freight services</a> &middot; <a href="/en/request-a-quote/">Request a freight quote</a></p>]]></content:encoded>
    </item>
    <item>
      <title>What Is a CMR Consignment Note?</title>
      <link>https://www.asellogistics.com.tr/en/blog/what-is-cmr-consignment-note/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/what-is-cmr-consignment-note/</guid>
      <pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate>
      <category>Freight Planning</category>
      <description>Learn what a CMR document records in international road freight, which shipment details it contains and what to check before dispatch.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/blog-navyardim.webp" alt="Palletised cargo and transport paperwork prepared for an international road shipment" /><figcaption>What Is a CMR Consignment Note?</figcaption></figure><p>A CMR consignment note records key shipment and transport-instruction details for international road carriage. The form and preparation process can vary by country, transport contract and the parties&apos; operating procedures.</p><p>A CMR is not a replacement for a commercial invoice or packing list, and it should not be treated on its own as an insurance policy or proof of ownership. Before dispatch, the parties should check that the shipment, participants and transport instructions are consistent across the documents.</p><h2>What information appears on a CMR?</h2><p>The document commonly includes shipper, carrier and consignee details; a cargo description; package or piece count; gross weight; and the loading and delivery locations. A transport reference and special instructions may also be included according to the applicable form.</p><p>The cargo description should match the information used on the invoice, packing list and customs documents. If an abbreviation or generic description does not clearly identify the goods, ask the relevant parties whether a more precise description is needed.</p><h2>What to check before dispatch</h2><p>Verify the legal names, full addresses and delivery point for the shipper and consignee. Compare the cargo description, quantity, piece count and weight against the commercial documents. If there are multiple pallets or product groups, confirm how each is shown in the transport instructions.</p><p>Tell the relevant parties in advance about special handling, delivery appointments, temperature conditions or customs instructions. If a draft document is used, make sure the approved final version reaches the driver and operations team.</p><h2>How the CMR relates to the invoice and packing list</h2><p>The commercial invoice records sales and value information, the packing list details packages and weight distribution, and the CMR supports the road-transport instructions and party details. The documents have different purposes; one should not be assumed to replace another.</p><p>If the transport plan changes, for example because the consignee address or cargo quantity is updated, the relevant documents may also need to be corrected by the appropriate parties. Confirm changes in writing with transport and customs contacts rather than relying only on a verbal update.</p><ul><li>Match party names and addresses to the transport instructions.</li><li>Check the cargo description, quantity, pieces and weight.</li><li>Keep the invoice and packing list consistent with the CMR.</li><li>Notify relevant parties in writing about route or delivery changes.</li></ul><h2>Plan the document flow for road freight</h2><p>The CMR is one part of the shipment documentation. Sharing origin and destination details, cargo characteristics and customs requirements early helps the transport team plan the document flow and delivery steps more clearly.</p><p><a href="/en/road-freight/">Road-freight services</a> &middot; <a href="/en/customs-clearance/">Customs-clearance services</a> &middot; <a href="/en/request-a-quote/">Request a road-freight quote</a></p>]]></content:encoded>
    </item>
    <item>
      <title>How to choose between road, sea or air freight</title>
      <link>https://www.asellogistics.com.tr/en/blog/how-to-choose-road-sea-or-air-freight/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/how-to-choose-road-sea-or-air-freight/</guid>
      <pubDate>Fri, 02 Oct 2026 00:00:00 GMT</pubDate>
      <category>Sea Freight</category>
      <description>The right transport mode is chosen by evaluating delivery date, cargo volume, route and delivery terms together. A practical framework for comparison.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/hero-port.webp" alt="Container ship, container stacking cranes and sea freight operations at a port" /><figcaption>How to choose between road, sea or air freight</figcaption></figure><p>Choosing a transport mode is one of the decisions that affects logistics cost the most. For the same cargo, sea, air, road and rail differ significantly in transit time and reliability, but the right option cannot be named without examining the cargo itself.</p><p>This guide compares the four main transport modes within one framework and explains how to work out the right mode for each shipment step by step. Instead of stopping at general statements like &quot;air is fast, sea is cheap&quot;, it looks at when each option stands out and what actually moves the cost.</p><h2>Start with the delivery date</h2><p>The most common mistake is to look at the cargo characteristics first and leave the delivery date for later. In reality, a transport plan is a chain of dependent steps, and the last step — the delivery date — determines how the first one is built.</p><p>First establish when the cargo will be ready. Then establish when it has to be delivered at the destination. The difference between the two is the time budget you have available for every mode.</p><p>Use that budget to ask which steps are inside the estimate: pick-up, terminal handling, customs inspection, transfers and final delivery at destination. Most delays originate in one of these steps that were left out during planning.</p><p>If the cargo ready date is close to the delivery date, or unclear, faster modes need to be evaluated. Conversely, a flexible delivery date combined with high volume opens up considerably more economical options.</p><h2>Compare cargo characteristics</h2><p>The defining cargo attributes are packaged dimensions, gross weight, volume, whether the goods stack, and any special transport conditions. Without this data, a mode comparison is not possible.</p><p>Sea freight usually offers one of the lowest unit costs for high-volume and heavy shipments. A cargo that fits inside the container but does not pass through the door opening is not usable in practice, which is why inner dimensions and door clearance must be checked separately.</p><p>Air freight is charged on volumetric weight, so bulky cargo can cost more than expected. That said, for parts and electronics where delivery time decides the outcome, air remains the strongest option.</p><p>Road freight is a balanced solution for medium volumes that require door-to-door delivery. Rail is the option for long-distance, high-volume shipments where cost over a longer horizon matters most.</p><h2>Account for customs and operating conditions</h2><p>Mode selection is not decided by physical attributes alone; operating conditions matter too. Customs regimes applied at border crossings can add to transit times. Sea and rail options can face unexpected delays when border crossings are congested.</p><p>Transit time restrictions for certain countries, dangerous goods rules and document requirements all shape the plan directly. Ask whether there are any regulations specific to your industry and route, and confirm them at the quotation stage.</p><h2>Clarify the quote scope</h2><p>When comparing two carriers&apos; prices, make sure the quote scope is the same. Pick-up, delivery, customs representation, insurance and terminal handling should appear as identifiable line items on both sides.</p><p>Some quotes cover the main carriage only, while others include the whole door-to-door process. Compare on scope rather than on a single figure. The difference between two quotes for the same shipment usually comes from the scope, not from the freight rate.</p><h2>Let us decide together</h2><p>These four steps point to the right mode for most shipments. If your cargo has its own conditions — regular sailings, special equipment, a fixed delivery window or insurance requirements — those need to be assessed separately at the quotation stage.</p><p>Sharing your shipment details lets us compare more than one option within the same scope. Send us your origin and destination, packaged dimensions, gross weight and cargo ready date, and we can work out the transport mode and quote scope together.</p><ul><li>The delivery date drives the comparison; cargo attributes are weighed against it.</li><li>Inner dimensions and door clearance are checked separately.</li><li>Volumetric weight can make air freight cost more than expected.</li><li>Quotes are compared on scope as well as on rate.</li></ul>]]></content:encoded>
    </item>
    <item>
      <title>How to measure palletized cargo: a checklist</title>
      <link>https://www.asellogistics.com.tr/en/blog/how-to-measure-palletized-cargo-pre-shipment-checklist/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/how-to-measure-palletized-cargo-pre-shipment-checklist/</guid>
      <pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate>
      <category>Road Freight</category>
      <description>When requesting a quote, share the outermost dimensions of the pallet rather than the product dimensions. A checklist for equipment selection and loading plans.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/og-post-en-how-to-measure-palletized-cargo-pre-shipment-checklist.jpg" alt="ASELL Logistics blog cover explaining pallet measurement and pre-shipment checks" /><figcaption>How to measure palletized cargo: a checklist</figcaption></figure><p>When requesting a quote, share the outermost dimensions of the shipment-ready pallet instead of the product dimensions. The difference between the two is sometimes a few centimetres, and sometimes it changes the equipment selection entirely.</p><p>The most common result of a wrong measurement is a different vehicle or container being assigned than planned. That means either an extra charge or a shipment that has to be re-planned. Working through the checklist below before you request a quote is the cheapest step in the whole process.</p><h2>Measure the outermost points</h2><p>Measurement starts from the outermost point of the packaging. Overhanging pallet boards, the bulge created by stretch wrap, corner protectors and any part of the cargo that extends beyond the pallet all count. The dimensions of a product inside a box are not the shipping dimensions of that box.</p><p>Write length, width and height separately and state which way the pallet will face during transport. If a pallet fits into a container lying on its side, the vertical measurement is below 2.30 metres and it can still be loaded; that detail is used directly in equipment planning.</p><p>If you use more than one pallet type, list each type separately. Giving a single average measurement per pallet misleads the plan. For carton-based shipments, state the carton count and how many of each size there are.</p><h2>State gross weight and stacking</h2><p>Weight information is not just the weight of the goods. Pallet, packaging, protective material and, where applicable, drums or crates are all included in the gross weight. Gross weight is used both in chargeable weight calculation and in the vehicle capacity check.</p><p>Stacking information directly affects the loading plan. If pallets cannot be stacked on each other, no second layer can be placed and the in-vehicle arrangement is built around that. Please also share the maximum stacking height the load can take.</p><p>Loading conditions are part of the plan too. Is there forklift access at the loading point, is there a ramp, will the vehicle be loaded from the side? A quote prepared without this information is an incomplete quote.</p><h2>Flag special conditions separately</h2><p>For temperature-controlled cargo, state the target temperature range. For humidity-sensitive goods, state the humidity limits. If dangerous goods are involved, specify the product class and the packaging standard used, so that ADR or IATA rules can be applied correctly.</p><p>Goods with a high customs inspection risk may need extra lead time for document preparation. Sharing these details at the quotation stage is what allows the plan to be built correctly from the start.</p><h2>Confirm equipment clearance</h2><p>You can compare your measurements against the equipment tables used in planning. Inner dimensions and door openings differ between standard, high cube and flat rack options; the dimension tables on our equipment page cover them.</p><p>However, dimension tables are a preliminary planning aid, not a commitment. The actual door clearance, capacity and loading method of the assigned vehicle must be confirmed at the quotation stage. For this reason, it helps to tell us how you measured.</p><p>The pallet type should also be decided alongside the measurement. The 120×80 cm and 120×100 cm euro pallets both exist, and each fits a different number of pallets per container. Container packing efficiency directly affects cost per cubic metre.</p><p>Where shipments follow a regular flow, standardising the pallet type shortens loading time and removes equipment suitability discussions altogether.</p><ul><li>Measure the shipment-ready outer dimensions including packaging.</li><li>List each pallet type separately.</li><li>Gross weight includes pallet and packaging.</li><li>State stacking capability and loading access.</li><li>Equipment clearance is confirmed at the quotation stage.</li></ul>]]></content:encoded>
    </item>
    <item>
      <title>Will the cargo fit through the container door?</title>
      <link>https://www.asellogistics.com.tr/en/blog/will-cargo-fit-through-container-door-dimension-check-guide/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/will-cargo-fit-through-container-door-dimension-check-guide/</guid>
      <pubDate>Mon, 09 Nov 2026 00:00:00 GMT</pubDate>
      <category>Sea Freight</category>
      <description>Cargo may fit inside a container but still not pass through the door opening. Check both measurements separately when selecting equipment.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/blog-konteyner.webp" alt="Loading a palletised load through the open door of a container" /><figcaption>Will the cargo fit through the container door?</figcaption></figure><p>Cargo may fit inside a container but still not pass through the door opening. These two measurements are usually close to each other; the difference comes from the loading direction and the geometry of the load. Looking only at the inner dimensions when selecting equipment can create a problem that has no practical solution.</p><p>This guide explains how to read container dimensions, what geometry governs whether the cargo passes through the door, and which checks to complete before shipment. Our aim is to make the difference between &quot;fits&quot; and &quot;passes&quot; clear at the quotation stage.</p><h2>Include pallet and packaging</h2><p>Container inner dimensions describe the cargo as it is shipped, not the cargo itself. Overhanging pallet boards, the bulge created by packaging, corner protectors and any part of the load extending beyond the pallet are all included.</p><p>Record the longest, widest and highest points separately. If the load has an irregular shape, the largest bounding box rather than the largest rectangle is what determines the outcome. When a product protrudes above the pallet, the height measurement is taken from that protrusion.</p><p>State which way the pallet will face during transport. A load that fits into a container lying on its side may be suitable even when its vertical measurement is above the limit, and that detail is used directly in equipment planning.</p><p>It is also worth confirming who took the measurements and with what. A few centimetres of difference between two measurements can change equipment suitability. Naming a single person responsible for measurement prevents later disagreements.</p><h2>Inner dimensions and door clearance are different</h2><p>On a standard container, the door opening is narrower than the inner dimensions. The difference in width and height is in the order of 5–10 cm, and it becomes decisive in cases where the door has to open fully.</p><p>Container types also differ from each other. Standard, high cube and flat rack options have different inner dimensions and door openings. Comparing your measurements against the tables lets you see in advance which types the cargo will fit.</p><p>In high-volume operations, using the full door clearance is rarely practical in practice. A working margin is normally left for the forklift or other loading equipment during loading. This is standard practice.</p><h2>Determine the loading method</h2><p>How the cargo enters the container matters as much as the measurements. If a forklift is planned, the angle at which the load will pass through the door and the manoeuvring space need to be assessed. For wide loads the forklift angle is more demanding; for narrow loads a straight entry is usually better.</p><p>State whether the cargo is stackable. For stackable loads the container arrangement can be optimised to fit more pallets, which directly reduces transport cost per cubic metre.</p><p>Special loads may require a crane, side loading or lifting from above. In those cases the equipment and the loading plan are built differently from a standard loading.</p><h2>Confirm the assigned equipment</h2><p>The dimension table is a preliminary planning aid. The actual door clearance, load capacity and loading method of the assigned vehicle must be confirmed at the quotation stage. In some cases the load fits the inner dimensions but a different unit is required because of loading equipment or depot conditions.</p><p>Where possible, testing the load against the real door opening before loading is the most reliable method. This kind of check catches problems at the cheapest point, before the shipment has started.</p><p>Where the door opening is not sufficient, flat rack or open top containers may be evaluated instead. In these options the loading direction changes, so the equipment decision follows the geometry of the load.</p><p>The loading equipment available at the loading point should be checked as well. If a depot can only load with a forklift, the load has to be compatible with that constraint. Otherwise the plan has to change on site.</p><ul><li>Inner dimensions and door clearance are checked separately.</li><li>Container types differ in dimensions.</li><li>Loading direction and equipment are part of the plan.</li><li>Stackability affects arrangement efficiency.</li><li>The actual door clearance is confirmed at the quotation stage.</li></ul>]]></content:encoded>
    </item>
    <item>
      <title>What to prepare for a freight quote</title>
      <link>https://www.asellogistics.com.tr/en/blog/what-information-to-prepare-for-a-freight-quote/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/what-information-to-prepare-for-a-freight-quote/</guid>
      <pubDate>Fri, 20 Nov 2026 00:00:00 GMT</pubDate>
      <category>Freight Planning</category>
      <description>A complete shipment summary helps prepare a quote with the right equipment, route and delivery terms.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/og-post-en-what-information-to-prepare-for-a-freight-quote.jpg" alt="ASELL Logistics blog cover explaining the details needed for a freight quote" /><figcaption>What to prepare for a freight quote</figcaption></figure><p>A complete shipment summary helps prepare a freight quote with the right equipment, route and delivery terms. A quote prepared with missing information usually has to be revised, and that costs both time and money.</p><p>The checklist below groups the information needed for a freight quote. Working through it before filling in the quote form is the most effective way to get an accurate price in the first round.</p><h2>Route and date</h2><p>Share the loading and delivery addresses as full addresses; city and country alone is not enough. Where there are several customs gates or depots in the same city, identifying the right one shortens planning time.</p><p>State the date the cargo will be ready and the required delivery date if there is one. Giving &quot;as soon as possible&quot; instead of a specific date keeps the plan realistic. If part of the cargo will be ready later, mention whether the shipment can be split.</p><p>Access conditions are the most frequently overlooked part: is there a ramp, are there height or weight limits at the vehicle entrance, does the depot run an appointment system? This information directly affects vehicle selection.</p><h2>Number of pieces, dimensions and weight</h2><p>Write the product type, number of boxes or pallets, packaged dimensions and gross weight. List pieces of different sizes separately; giving an average dimension means the loading plan does not reflect the real distribution.</p><p>For palletised shipments the outermost pallet dimensions must include the packaging bulge and any part of the load extending beyond the pallet. State the stacking situation: if pallets cannot be stacked, the arrangement is built accordingly.</p><p>Temperature, humidity, dangerous goods and fragility must always be stated. These conditions affect both equipment selection and additional cost items.</p><h2>Requested service scope</h2><p>Specify whether door pick-up, delivery to destination, warehousing or customs clearance support is required. Even if each item is written separately, it becomes clear which steps the quote covers.</p><p>If insurance is needed, say so as well. During transport, cargo damage is covered by different policies depending on whether it is carrier liability or cargo insurance, and which one applies should be settled before the quotation.</p><h2>Common mistakes</h2><p>The most common mistake is giving the product dimensions while assuming they are the pallet dimensions. The second most common is quoting gross weight without packaging. The third is leaving out the cargo ready date.</p><p>These three gaps lead to follow-up questions and price revisions during the quotation stage. A small amount of preparation prevents a quotation cycle that can take days.</p><p>Similarly, an unspecified service scope is one of the most frequent omissions. The word &quot;transport&quot; alone does not indicate whether door-to-door delivery or only the main carriage is meant. Making this distinction clear before quoting removes price differences that would otherwise appear later.</p><p>Finally, the delivery address should be given in full. A city and postcode alone may not identify the correct customs gate or delivery point. A complete address prevents an unnecessary transfer from the outset.</p><ul><li>Addresses are shared as full addresses.</li><li>Pallet dimensions include packaging and protrusions.</li><li>Gross weight includes packaging.</li><li>Ready and delivery dates are stated.</li><li>Service scope and insurance needs are written down.</li></ul><h2>After the quote</h2><p>A quote prepared with complete information does not need revision. Once it is accepted, planning moves straight into operations: equipment allocation, loading appointment, document preparation and the delivery steps at destination are all tracked.</p><p>Regular updates are provided during the shipment. Transfers, border crossings and changes at destination are reported, so that planning on your side can continue.</p><p>Once delivery is complete, proof of delivery is shared and, where needed, a detailed billing breakdown is provided with it.</p>]]></content:encoded>
    </item>
    <item>
      <title>FCL or LCL? Choosing the right container</title>
      <link>https://www.asellogistics.com.tr/en/blog/fcl-or-lcl-choosing-the-right-container-for-sea-freight/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/fcl-or-lcl-choosing-the-right-container-for-sea-freight/</guid>
      <pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate>
      <category>Sea Freight</category>
      <description>With FCL, the container is dedicated to a single shipper; with LCL, your cargo is shared with other shipments. Volume, delivery date and scope are evaluated together.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/og-post-en-fcl-or-lcl-choosing-the-right-container-for-sea-freight.jpg" alt="ASELL Logistics blog cover comparing FCL and LCL container choices" /><figcaption>FCL or LCL? Choosing the right container</figcaption></figure><p>In sea freight, FCL means a container is dedicated to a single shipper. With LCL, your cargo shares the same container with other shipments. The difference between the two is not only about price: it also has practical consequences for transit time, handling, damage risk and the document workload.</p><p>This guide covers the fundamental differences between FCL and LCL, when each is the better fit, and how to reach a decision. The choice does not turn on a single volume threshold; it depends on the specifics of the shipment.</p><h2>The core differences between FCL and LCL</h2><p>With FCL the entire container capacity is yours. The cargo is not consolidated with other shipments on arrival and is not handled again during distribution. With LCL your cargo is combined with other shipments at consolidation points and separated on arrival.</p><p>That difference can add several days to the transit time. Because LCL shipments pass through more handling steps at the consolidation centre, the risk of damage is also relatively higher: your cargo may arrive in a box that has already been opened and repacked.</p><p>The document workload differs as well. An FCL load is carried under a single declaration, whereas LCL requires separate documents for each shipment plus matching steps during consolidation.</p><h2>Measure the cargo with its packaging</h2><p>Record each piece&apos;s dimensions including the pallet and its gross weight. Specify pieces that cannot be stacked or require special loading.</p><p>The door opening is as important as the container&apos;s internal dimensions. Even if the cargo fits inside the container, it may not pass through the door, in which case an FCL plan cannot be executed. If you use more than one pallet type, report the quantity of each.</p><p>For temperature-controlled cargo the reefer option changes the door clearance limits, and the measurement must be taken against those values instead.</p><h2>Compare sailing and transfer plans</h2><p>With LCL, consolidating cargo and separating it on arrival affects the total time. A shipment that misses the consolidation schedule waits for the next sailing.</p><p>Ask for the estimated departure, arrival and final delivery dates for both options. Also ask about the number of transfers and how that affects cost. The price difference between a direct and a connecting service can be far smaller than the transit time difference.</p><h2>Evaluate quotes on the same scope</h2><p>Confirm which items are included: pick-up, terminal handling, handling and final delivery. LCL prices usually cover the port-to-port leg only; door-to-door service carries additional items.</p><p>With FCL as well, container loading and unloading charges may be assessed separately. Use the same scope as the basis when comparing the two options.</p><p>For preliminary planning you can review the equipment dimensions and check your total volume with the volume calculator.</p><h2>How to settle the decision</h2><p>In short, regular and high-volume shipments generally benefit from the predictability of FCL. Small, one-off shipments can be more economical with LCL, where capacity is shared.</p><p>Volume alone is not a sufficient criterion. Delivery date, the sensitivity of the goods, handling conditions at destination and shipping frequency all contribute to the decision.</p><p>Once you share your shipment details we can compare FCL and LCL within the same scope. Sending us your ports of loading and discharge, volume, weight and delivery date is enough to start.</p><ul><li>FCL dedicates the container to you; LCL shares it.</li><li>LCL adds consolidation and separation time on arrival.</li><li>The document workload is higher with LCL.</li><li>Door clearance is checked for both options.</li><li>Quotes are compared within the same service scope.</li></ul>]]></content:encoded>
    </item>
    <item>
      <title>How inflation affects logistics costs</title>
      <link>https://www.asellogistics.com.tr/en/blog/how-inflation-affects-logistics-and-cost-management/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/how-inflation-affects-logistics-and-cost-management/</guid>
      <pubDate>Thu, 12 Nov 2026 00:00:00 GMT</pubDate>
      <category>Freight Planning</category>
      <description>Cost control through route optimisation, inventory management and technology in the face of rising fuel, labour and warehousing costs.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/blog-enflasyon.jpg" alt="Cargo and vehicle planning in response to rising costs" /><figcaption>How inflation affects logistics costs</figcaption></figure><p>In today&apos;s environment of economic fluctuations and uncertainty, the effects of inflation on the logistics sector are increasing. Rising costs, supply chain disruptions and price pressures leave logistics businesses facing a challenging period.</p><p>Inflation does not only affect freight rates. Cost items across every link of the chain rise at the same time, and the combined effect is larger than the sum of the individual items. Understanding how each component moves is what makes cost management possible.</p><h2>Effects of inflation on the logistics sector</h2><p>Fuel and energy costs move fastest. In road transport in particular, fuel makes up a growing share of the freight rate on long-distance corridors, so increases pass through to carriers quickly. In air freight, jet fuel is the dominant cost component and rises produce a disproportionate effect on rates.</p><p>Labour costs affect labour-intensive activities: warehouse operations, handling, picking and distribution. Although these items represent a smaller share of total cost, they usually carry inflation-linked adjustment clauses in contracts, which makes them directly relevant to long-term price expectations.</p><p>On the warehousing side, rent, energy and insurance costs move together. Metrics such as ceiling height and inventory turnover determine how fixed costs are spread across customers, which means that in inflationary periods the utilisation rate of the warehouse directly affects unit cost.</p><p>Finally, the cost of vehicles and equipment rises, which extends fleet renewal cycles and increases depreciation. Supply chain disruptions also create additional cost: waiting cargo, re-planned shipments and delay notifications to customers all translate directly into lost money.</p><ul><li>Rising fuel costs create cost pressure, especially in road, sea and air transport.</li><li>Increasing labour costs affect labour-intensive activities such as warehousing, transport and distribution.</li><li>Vehicle and equipment prices and maintenance costs rise.</li><li>Rent, energy and operating expenses increase warehousing costs.</li><li>Supply chain uncertainty can increase inventory costs and delays.</li></ul><h2>Cost management strategies</h2><p>Effective cost management in inflationary periods starts by reviewing the transport plan as a whole rather than optimising a single item.</p><p>Route optimisation produces the most concrete savings here. A poor route, an unnecessary border crossing or a shipment collected away from the destination translates directly into fuel burn and lost time. Placing consolidation points correctly during shipment planning improves both the freight rate and total transit time.</p><p>Improving demand forecasting has an indirect but significant effect. High inventory raises warehousing space and financing costs, while low inventory carries the risk of disrupting production. The balance between the two becomes more delicate as prices move.</p><p>Digitalising processes reduces handling steps and document errors, producing savings in both cost and time. Automating repeated control steps has a measurable impact, particularly at high shipment volumes.</p><p>Using inflation-indexed price adjustment clauses in contracts is the most effective way to protect margin in long-term commitments. Making the scope of each quote item explicit increases the practicality of applying such arrangements.</p><p>Finally, team efficiency is the most durable answer to cost inflation. Experienced operations teams make a measurable difference in vehicle selection, load planning and early problem detection.</p><ul><li>Reduce fuel consumption and unnecessary distances through route optimisation.</li><li>Improve the vehicle fleet and warehousing facilities for energy efficiency.</li><li>Optimise inventory levels with demand forecasting.</li><li>Reduce manual processes by digitalising logistics operations.</li><li>Apply inflation-indexed price adjustments and cost analysis in contracts.</li><li>Run training and motivation programmes to increase employee productivity.</li></ul><h2>The ASELL Logistics approach</h2><p>At ASELL Logistics, we are aware of the effects of inflation on the logistics sector. Our approach is to evaluate the transport plan as a whole together with you, rather than simply monitoring cost increases in isolation.</p><p>With our technology infrastructure, experienced team and broad partner network, we help our clients optimise their logistics processes and gain a competitive advantage. As part of this, transport mode selection, route planning and the scope of additional services are evaluated together.</p><p>The outcome of this approach is more predictable costs and delivery times without surprises. For businesses with complex shipment profiles, optimising cost and time together within the transport plan is the decisive step.</p><ul><li>Transport mode is selected with volume, delivery date and route together.</li><li>Quote scope is clarified item by item.</li><li>Inventory and warehousing plans are aligned with the transport plan.</li><li>Operations and shipment tracking run with regular updates.</li></ul>]]></content:encoded>
    </item>
    <item>
      <title>What Is LTL Freight?</title>
      <link>https://www.asellogistics.com.tr/en/blog/what-is-ltl-freight/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/what-is-ltl-freight/</guid>
      <pubDate>Fri, 06 Nov 2026 00:00:00 GMT</pubDate>
      <category>Road Freight</category>
      <description>Learn how less-than-truckload shipping works, which shipments it suits and what affects an LTL freight quote.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/og-post-en-what-is-ltl-freight.jpg" alt="ASELL Logistics blog cover explaining less-than-truckload road freight" /><figcaption>What Is LTL Freight?</figcaption></figure><p>Less-than-truckload (LTL) freight is a road transport option for shipments that do not need an entire vehicle. Your cargo shares vehicle capacity and a planned route with other compatible shipments. The quote is based on the space used and the requested service scope rather than an exclusive truck.</p><p>LTL is not automatically the cheapest or fastest option for every shipment. Compare dimensions, gross weight, ready date, delivery expectations and loading requirements before choosing between shared and dedicated capacity.</p><h2>How does LTL shipping work?</h2><p>The carrier plans compatible shipments by origin, destination and route. Depending on the network and service, cargo may be collected locally, consolidated or transferred at a hub, then separated for delivery near its destination. Not every shipment follows the same number of handling or transfer steps.</p><ul><li>Shipment details and handling conditions are collected.</li><li>The vehicle, route and service scope are planned.</li><li>Cargo is picked up and consolidated when required.</li><li>After line-haul and any planned transfers, shipments are sorted for delivery.</li><li>The agreed delivery service is completed and proof of delivery is shared.</li></ul><h2>When is LTL a good fit?</h2><p>LTL can be considered for cartons, pallets and similar shipments that do not fill a truck and have clear dimensions and handling requirements. Businesses with smaller or recurring shipments can compare shared capacity instead of paying for a vehicle they do not need.</p><p>If cargo needs a direct journey, has a strict delivery window, uses capacity close to a full vehicle, or needs special temperature, security, dangerous-goods or handling conditions, compare LTL with dedicated transport on the same scope. Suitability can only be confirmed after reviewing the shipment and route.</p><h2>What affects an LTL freight quote?</h2><p>There is no single fixed LTL price. A quote depends on the shipment, route, collection and delivery conditions, handling needs and the services included. When comparing quotes, check that the included items are the same.</p><ul><li>Number of cartons or pallets, outer packaged dimensions and gross weight</li><li>Origin and destination, vehicle access, and loading or delivery conditions</li><li>Stackability, loading equipment and special handling requirements</li><li>Cargo ready date and requested delivery window</li><li>Additional services such as warehousing, customs clearance, insurance or final delivery</li></ul><p><a href="/en/volume-calculator/">Use the volume calculator</a> &middot; <a href="/en/equipment-dimensions/">Review equipment dimensions</a></p><h2>LTL vs. full truckload (FTL)</h2><p>With LTL, vehicle capacity is shared by several shipments. With full truckload (FTL), the vehicle is allocated to one shipment. A dedicated vehicle may suit cargo that needs a direct route or greater control; for a smaller shipment, paying for all capacity may add unnecessary cost. Compare delivery dates and the complete door-to-door scope, not just the line-haul price.</p><p>LTL and FTL refer to road freight. FCL and LCL are terms used in ocean container shipping. The sharing principle is similar, but the processes and pricing are different.</p><p><a href="/en/road-freight/">Explore road freight services</a> &middot; <a href="/en/blog/fcl-or-lcl-choosing-the-right-container-for-sea-freight/">Read the FCL vs. LCL guide</a></p><h2>What should you prepare before requesting a quote?</h2><p>Measure the shipment in the condition it will travel. Include the pallet and packaging, list pieces with different dimensions separately, and provide origin, destination and cargo ready date. State whether the cargo can be stacked, needs a forklift or ramp, or requires temperature control or other special handling.</p><ul><li>Origin and destination addresses or cities</li><li>Carton or pallet count, outer dimensions for each piece and gross weight</li><li>Cargo ready date and preferred delivery window</li><li>Stacking and handling conditions</li><li>Additional services such as customs clearance, warehousing or final delivery</li></ul><h2>Frequently asked questions</h2><h3>Can LTL be door-to-door?</h3><p>It can be, but confirm whether collection and final delivery are included in the quote. Share vehicle access, appointments, floor or lift access, and loading equipment requirements in advance.</p><h3>Is LTL always cheaper than a full truck?</h3><p>No. Shared capacity may be cost-effective for a smaller shipment, but route, handling, delivery conditions and additional services affect the total. Compare both options on the same delivery scope.</p><h3>Why can LTL delivery time vary?</h3><p>Cargo readiness, consolidation and distribution schedules, route conditions and transfer requirements can affect the estimate. Ask for shipment-specific departure and delivery dates rather than relying on a generic transit-time promise.</p><h2>Request an LTL freight quote</h2><p>Share the cargo dimensions, gross weight, route and ready date. Our team can compare LTL with other suitable options and clarify what each quote includes.</p>]]></content:encoded>
    </item>
    <item>
      <title>How are sea freight prices determined?</title>
      <link>https://www.asellogistics.com.tr/en/blog/how-sea-freight-prices-are-determined/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/how-sea-freight-prices-are-determined/</guid>
      <pubDate>Tue, 24 Nov 2026 00:00:00 GMT</pubDate>
      <category>Sea Freight</category>
      <description>Freight is a single line, not a single cost: container type, utilisation, ports, season and surcharges shape the total. A layer-by-layer look at pricing.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/og-post-en-how-sea-freight-prices-are-determined.jpg" alt="ASELL Logistics blog cover explaining sea-freight pricing components" /><figcaption>How are sea freight prices determined?</figcaption></figure><p>A sea freight price is not one number on four lines. The freight rate is the most visible item on a quote, but the total cost of a shipment is built from the container type, the utilisation, port charges, seasonal effects and the additional items on the destination side.</p><p>This guide shows the layers that make up a sea freight quotation and what each layer depends on. The goal is to let you read two different carriers&apos; quotes on scope rather than on the total alone.</p><h2>What the freight rate actually depends on</h2><p>In FCL the rate is quoted per container; in LCL it is charged on whichever is greater, the volume or the weight. The sailing schedule between the origin and destination ports, the number of transhipments and the capacity on the corridor all feed directly into the quote.</p><p>The container type changes the rate as well. A standard dry van usually carries the most competitive base price, while special equipment such as reefers, open tops and flat racks is priced differently because of equipment availability and handling conditions. If your cargo needs special equipment, that difference appears separately on the quote.</p><p>The ports of call along the route, the line&apos;s overall network strategy and the handling conditions at the destination terminal are further variables. This is why two quotes for the same port pair can genuinely differ.</p><h2>How container type and utilisation move the cost</h2><p>In FCL you pay for the container regardless of how many cubic metres go inside. Placing the same cargo in a 20 ft or a 40 ft unit therefore changes the unit cost decisively. When the load fills a 40 ft container to a sensible level, the cost per cubic metre usually works out better.</p><p>LCL works the other way round: you pay for the volume you actually use. On small shipments a minimum charge can apply, and the extra handling steps raise the destination-side costs. As shipment volume grows, the crossing point between FCL and LCL shifts; that calculation has to be made per shipment.</p><p>Utilisation is about weight as much as volume. A light but bulky cargo fills the container by volume, while a heavy, compact cargo fills the payload capacity first. With the equipment dimension tables you can see in advance in which container your load will stow most efficiently.</p><p><a href="/en/equipment-dimensions/">Equipment dimension tables</a> &middot; <a href="/en/comparisons/fcl-mi-lcl-mi/">FCL versus LCL comparison</a></p><h2>Which items sit outside the freight rate?</h2><p>On the origin side, terminal handling, documentation and file fees, VGM weighing and container pick-up conditions come into play. Whether these are listed separately in the carrier&apos;s quote or bundled into the freight is one of the first things to check when comparing.</p><p>On the ocean leg, some lines add fuel, currency and other surcharges on top of the freight. The names and amounts of these surcharges can change from sailing to sailing, so it is worth confirming whether the quote fixes them or estimates them.</p><p>On the destination side, terminal handling, inland transport, storage and customs are added. When the free time is exceeded, a container held at the port incurs demurrage and one held outside the port incurs detention. These two charges are the most expensive consequence of a delayed delivery plan, and the free-time conditions should be clarified at the quotation stage.</p><h2>How season and capacity move the price</h2><p>Sea freight prices follow the supply and demand of capacity. Around year-end, before the Chinese New Year and during agricultural export seasons, lines may apply surcharges, and in tight periods finding space becomes harder.</p><p>Contract pricing and spot pricing behave differently here. Shippers with regular volumes can secure price and capacity commitments for a period, while occasional shippers are exposed to the current market rate. Your shipment volume and regularity determine which model suits you.</p><p>Because of these swings, comparing two quotes taken at different dates can be misleading. Where possible, compare within the same week and on the same delivery terms.</p><h2>How to compare quotes properly</h2><p>Put the line items of two sea freight quotes side by side: freight, origin and destination port charges, surcharges, customs, inland transport and delivery. Even when the totals look similar, the quote with the narrower scope can end up more expensive once operations begin.</p><p>Also weigh the transit time, sailing frequency and free-time conditions against the price. One day&apos;s difference can cost a production or stock plan more than the freight difference. That is why time and scope deserve rows in the comparison table too.</p><ul><li>The freight rate is read together with port, surcharge and destination items.</li><li>Container type and utilisation decide the unit cost.</li><li>Demurrage and detention conditions are clarified at the quotation stage.</li><li>Seasonal effects mean quotes are compared within the same period and scope.</li><li>Transit time and sailing frequency are weighed alongside the price.</li></ul><h2>Clarify the price layers for your shipment</h2><p>Share the cargo type, the number of boxes or pallets, the packaged dimensions, the gross weight, the origin and destination ports and the ready date. Our team will present FCL and LCL options, suitable container types and a quote scope broken down line by line.</p><p><a href="/en/volume-calculator/">Calculate the volume weight</a> &middot; <a href="/en/request-a-quote/">Request a freight quote</a></p>]]></content:encoded>
    </item>
    <item>
      <title>What is an HS code? Customs classification</title>
      <link>https://www.asellogistics.com.tr/en/blog/what-is-an-hs-code-customs-classification-guide/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/what-is-an-hs-code-customs-classification-guide/</guid>
      <pubDate>Tue, 01 Dec 2026 00:00:00 GMT</pubDate>
      <category>Freight Planning</category>
      <description>The tariff code determines duty, quotas and the pace of customs. How classification is done and what a wrong declaration costs.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/og-post-en-what-is-an-hs-code-customs-classification-guide.jpg" alt="ASELL Logistics blog cover explaining HS codes and customs classification" /><figcaption>What is an HS code? Customs classification</figcaption></figure><p>The tariff code (GTİP in Turkish customs, based on the HS structure) is the numbered classification every good takes on the customs declaration. It may look invisible on a freight quote, yet it decides the duty rate, quota application, permit requirements and the time the shipment spends in customs.</p><p>This guide explains what the code determines, how classification is done properly and what a wrong declaration does to a shipment. The aim is to connect this preparation step with your freight planning rather than leaving it to the end.</p><h2>What does the tariff code determine?</h2><p>Classification fixes the customs duty rate. Two codes inside the same product group can fall under different duties and additional charges; on recurring shipments that difference becomes a significant share of the total cost.</p><p>The code also decides how quota and tariff-rate applications, counterfeiting controls and import or export permits apply to the goods. The conditions under which origin documents such as ATR or EUR.1 can be used are assessed together with the classification.</p><p>Operationally, a correctly classified declaration improves the contents of the file, the likelihood of inspection and the time spent in customs. A wrong or late-defined code produces extra cost outside the freight plan.</p><h2>How is the correct code found?</h2><p>Classification follows the composition, material, intended use and technical properties of the goods. The marketing name is not enough: technical documents, component lists and usage information are the inputs classification is built on.</p><p>The numbering follows an international nomenclature: sections, chapters, headings and subheadings. In Türkiye declarations run on the version of this structure adapted to the customs regulation. At the decision stage, tariff explanations and any binding rulings have to be reviewed.</p><p>The most reliable practice is to keep the technical documentation of the product ready and to make the final declaration together with your customs broker. Writing the goods description correctly at the quotation stage keeps the transport plan moving without waiting on this step.</p><h2>The risks of a wrong classification</h2><p>A wrong tariff declaration carries the risk of a duty difference plus penalties. Until it is corrected, the goods can wait in customs, and that waiting produces storage, re-documentation and delivery delay costs.</p><p>On goods subject to quota or tariff-rate rules, a classification error also breaks the period planning. A shipment started on the assumption that the permit was granted enters a new document and waiting process at the border.</p><p>The way to lower these risks is to move classification ahead of the shipment: the goods description, technical documents and the declaration file are completed before loading. Customs then runs on the same calendar as the freight and delivery plan.</p><h2>Frequently asked questions</h2><h3>Who is responsible for the declaration?</h3><p>The declaration is made by an authorised customs broker on behalf of the importer or exporter. But sharing the correct classification inputs — goods description, technical documents, composition information — is the responsibility of the goods owner.</p><h3>Is a GTİP the same as an HS code?</h3><p>They are very close concepts derived from the same structure. The HS code is the international nomenclature; GTİP is the Turkish customs version used on import and export declarations.</p><h3>How would I notice a wrong classification?</h3><p>The most common signals are an unexpected duty rate, a customs inspection or a document request, and different treatment on earlier shipments. Corrections after the declaration follow the regulation, which is why clarifying classification before the shipment is the cheapest approach.</p><h2>Build the customs file together with the transport plan</h2><p>Prepare the goods description and technical documents before the shipment. Our team coordinates the transport plan with customs and documentation on one calendar; classification, origin and permit requirements are clarified with the relevant parties.</p><ul><li>The goods description and technical documents are ready before the shipment.</li><li>The tariff code directly determines duties and quota applications.</li><li>Origin documents are assessed together with the classification and agreement conditions.</li><li>The declaration file follows the same calendar as the freight plan.</li></ul><p><a href="/en/customs-clearance/">Customs clearance service</a> &middot; <a href="/en/blog/what-information-to-prepare-for-a-freight-quote/">Pre-shipment document checklist</a></p>]]></content:encoded>
    </item>
    <item>
      <title>What are demurrage and detention?</title>
      <link>https://www.asellogistics.com.tr/en/blog/what-are-demurrage-and-detention/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/what-are-demurrage-and-detention/</guid>
      <pubDate>Tue, 08 Dec 2026 00:00:00 GMT</pubDate>
      <category>Sea Freight</category>
      <description>Was the container held at the port or outside it? When the two waiting charges kick in and how to prevent them.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/og-post-en-what-are-demurrage-and-detention.jpg" alt="ASELL Logistics blog cover explaining demurrage and detention charges" /><figcaption>What are demurrage and detention?</figcaption></figure><p>Demurrage and detention are charges that arise when the free time on a container runs out. They are invisible on the quote and produce the largest difference when delivery slips.</p><p>They trigger in different places: one at the port yard, one outside it. This guide explains when and why each charge occurs, how to clarify them at the quotation stage and which steps prevent them.</p><h2>What is demurrage?</h2><p>Demurrage applies when a container is held at the port or terminal yard beyond the free time. It accumulates daily when unloading and pick-up from the yard are delayed.</p><p>The process depends on the container being released, customs procedures being completed and the pick-up plan from the yard. In busy periods, yard capacity and appointment systems also move the pick-up calendar.</p><p>Conditions change by line and port: free time, the charge table and how it escalates should be clarified on the quote. Even at the same port, different carriers can have different terms.</p><h2>What is detention?</h2><p>Detention is the usage charge for a container held outside the port by the shipper or the consignee. The container has been unloaded but has not been returned empty on time.</p><p>This charge is directly linked to how quickly the container is returned. Inland transport, the empty return to the depot and return appointments, planned together, reduce the detention risk.</p><p>Some arrangements price inland use and the outside-port period under different names; the quote should separate which item covers which stage.</p><h2>How do you prevent waiting charges?</h2><p>The most effective measure is preparing the destination-side work before the container arrives: complete documents, the customs file, an inland transport reservation and an empty return plan run as one chain. When the container arrives and the plan is missing, the free time burns fast.</p><p>Moving document preparation ahead of the shipment lowers the chance of waiting in customs. The commercial invoice, packing list and product-specific documents should be ready on the loading day.</p><p>Inland transport and the empty container return belong on the calendar too. When yard appointments, depot working hours and the delivery address capacity are planned together, the container leaves the yard on time.</p><ul><li>Document completeness and the customs file are ready before the container arrives.</li><li>Inland transport and the empty return are written into the arrival calendar in advance.</li><li>Free time and charge conditions are clarified at the quotation stage.</li><li>Yard and appointment capacity are checked ahead of busy periods.</li></ul><h2>What conditions should you check on a quote?</h2><p>When comparing two quotes, the waiting terms deserve a row: how many free days, what drives the charge and which stage each charge covers. Quotes that look similar in total can differ widely in waiting conditions.</p><p>Weigh the transit time and sailing frequency alongside them. A small delay in the delivery plan can turn into a large charge within a few days once the free time runs out.</p><h2>Frequently asked questions</h2><h3>How long is the free time?</h3><p>It varies by line, port and agreement. There is no general fixed period; the free-time conditions should be confirmed per container type and port at the quotation stage.</p><h3>Can demurrage and detention accumulate together?</h3><p>They trigger at different stages: when the container leaves the yard, demurrage stops and the outside-port period can start detention. Even when the conditions do not overlap, a chained delay raises the total quickly, which is why both stages should be planned together.</p><h3>Who sets the charge table?</h3><p>Conditions are set by line, terminal and agreement. When the shipper or consignee delays their own stage, the charge lands on their shipment; the distribution of responsibility is clarified with the quote scope.</p><h2>Deliver your container on time</h2><p>Share the destination port, the delivery address and the ready date. Our team builds the inland transport, customs and empty return plan on the shipment calendar and clarifies the free-time conditions at the quotation stage.</p><p><a href="/en/sea-freight/">Sea freight service</a> &middot; <a href="/en/blog/how-sea-freight-prices-are-determined/">How sea freight prices are determined</a></p>]]></content:encoded>
    </item>
    <item>
      <title>Which Incoterms 2020 term covers what?</title>
      <link>https://www.asellogistics.com.tr/en/blog/incoterms-2020-which-term-covers-what/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/incoterms-2020-which-term-covers-what/</guid>
      <pubDate>Mon, 16 Nov 2026 00:00:00 GMT</pubDate>
      <category>Freight Planning</category>
      <description>The difference between EXW, FOB, CIF and DDP is not only freight. Insurance, customs and where risk starts all depend on the term.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/og-post-en-incoterms-2020-which-term-covers-what.jpg" alt="ASELL Logistics blog cover explaining Incoterms 2020 delivery terms" /><figcaption>Which Incoterms 2020 term covers what?</figcaption></figure><p>Incoterms 2020 is the international standard that defines at which stage a shipment passes from buyer to seller. The answers to who pays freight, who arranges insurance and who prepares the customs declaration all sit in the delivery term.</p><p>The delivery term is one line on the invoice, yet it shapes the whole operation: loading point, transfer of risk, document responsibility and port waiting charges all depend on it. This guide explains what the common terms cover and which criteria guide the choice.</p><h2>What Incoterms is and what it does not cover</h2><p>Incoterms is the delivery-terms standard published by the International Chamber of Commerce (ICC). The 2020 edition contains 11 terms; each defines the delivery and the transfer of risk at a specific point of the shipment.</p><p>What stays outside is also clear: the price of the goods, payment conditions and the quality and warranty clauses of the sales contract are not part of Incoterms. Most disputes arise when the delivery term contradicts another clause of the sales contract.</p><p>This is why the delivery term should be written in the same format in both the sales contract and the transport instructions. The edition year is stated openly: Incoterms 2020.</p><h2>EXW, FCA, FOB, CIF and DDP compared</h2><p>All terms distribute the delivery point, the risk, the freight and insurance duties and the customs responsibility differently. The summary of the five common terms is as follows.</p><ul><li>EXW (Ex Works): The seller makes the goods available at its own address. Truck loading, export customs and the entire transport risk stay with the buyer.</li><li>FCA (Free Carrier): The seller hands the goods to the carrier at an agreed point; export customs belongs to the seller and the main transport risk passes to the buyer.</li><li>FOB (Free On Board): Risk passes to the buyer once the goods are loaded on the vessel; export customs belongs to the seller, freight and insurance to the buyer.</li><li>CIF (Cost, Insurance and Freight): Freight and insurance belong to the seller, but risk passes to the buyer at the ship&apos;s rail; the insurance is at a minimum level.</li><li>DDP (Delivered Duty Paid): Responsibility, including customs duties, sits with the seller until the destination address; risk transfers at the very last point.</li></ul><h2>Which term fits your operation</h2><p>The choice depends on four questions: which party can manage the customs process, who wants to arrange insurance, where inland transport at destination sits and how strict the delivery window is. FCA or FOB is common on exports, CIF or DAP when the receiving side wants controlled delivery, and DAP for door to door shipments under a single contract.</p><p>DDP is a strong sales argument but it binds the seller to the tax and customs rules of the destination country. Offering DDP without a tax registration in the destination country produces unexpected costs; the conditions of both sides should be verified on this term.</p><p>For shipments leaving Türkiye, keeping export customs on the seller&apos;s side (FCA/FOB) speeds up the document flow; on imports, the buyer can plan freight and insurance under FOB. In both cases the term has to match the transport plan.</p><h2>Frequently asked questions</h2><h3>Where is the term written in the contract?</h3><p>The commercial invoice and the sales contract state the delivery place together with the edition year, for example FCA Istanbul, Incoterms 2020. The transport instructions use the same format.</p><h3>Why is EXW risky for the buyer?</h3><p>All steps, including truck loading and export customs, stay with the buyer. Running procedures in the seller&apos;s country creates bureaucratic risk for the buyer; FCA is usually a more balanced choice on exports.</p><h3>Who takes out insurance?</h3><p>Only CIF and CIP put the obligation to insure on the seller, and at a minimum cover level. Under other terms insurance depends on the agreement between the parties; the party taking over the risk is advised to track the cover.</p><h2>Put the delivery term on your quote</h2><p>Share the delivery term, the origin point and the delivery window. Our team checks that the term matches the transport plan and shows the freight, insurance and customs responsibilities as separate lines in the quote scope.</p><p><a href="/en/customs-clearance/">Customs clearance service</a> &middot; <a href="/en/blog/what-is-an-hs-code-customs-classification-guide/">What is an HS code? Customs classification</a></p>]]></content:encoded>
    </item>
    <item>
      <title>Import cassation and quota: planning impact</title>
      <link>https://www.asellogistics.com.tr/en/blog/import-cassation-and-quota-applications/</link>
      <guid isPermaLink="true">https://www.asellogistics.com.tr/en/blog/import-cassation-and-quota-applications/</guid>
      <pubDate>Mon, 30 Nov 2026 00:00:00 GMT</pubDate>
      <category>Freight Planning</category>
      <description>Tariff quotas and surcharges by HS code change the freight plan. The calculation has to happen before the shipment is booked.</description>
      <content:encoded><![CDATA[<figure><img src="https://www.asellogistics.com.tr/images/og-post-en-import-cassation-and-quota-applications.jpg" alt="ASELL Logistics blog cover explaining import quotas and tariff measures" /><figcaption>Import cassation and quota: planning impact</figcaption></figure><p>On imports, freight, customs duty and waiting times vary by product. The quota, tariff measure and cassation application applied to the product&apos;s HS code shape the shipment plan from the quotation stage onward.</p><p>Two products on the same lane can have a different cost and transit plan. This guide explains when cassation and tariff applications come into force, how quota distribution changes the shipment plan and why the calculation has to happen in advance.</p><h2>What cassation and tariff applications are</h2><p>Import cassation tracks the volume of a product entering the country within a given period. A country can apply product-specific measures on the tariff: an additional duty, a quota or a permit requirement are examples.</p><p>Tariff applications show up in the customs table by HS code. An application is valid within a given period or quota volume; the period and volume are not the same for every product.</p><p>This is why the freight quote needs the HS code of the product. A calculation made without the HS code can change at customs, and the shipment plan would have been built for nothing.</p><h2>How quotas change the shipment plan</h2><p>Quotas work in periods: when the defined volume for the period is filled, the remaining shipments fall to the next period or into a permit process. This waiting directly affects the delivery window.</p><p>Planning the shipment before the quota fills requires writing the permit and approval steps into the calendar in advance. In busy periods permit applications take longer; putting the waiting into the plan reduces the delay risk.</p><p>A wrong HS code drops the product onto the wrong tariff line: extra duty, out-of-quota treatment or additional document requests come up. All three distort both the cost and the delivery date.</p><h2>Moving the calculation ahead of the quote</h2><p>What the quotation stage needs is clear: the HS code of the product, the country of production, the annual shipment volume and the delivery window. With these four details the cassation, quota and tariff status is checked; the plan is built on that result.</p><p>The variables that move the cost are not only freight: customs duty rates, quota waiting time, storage risk and document preparation all land on the total cost. The check done before the shipment prevents surprises at delivery.</p><ul><li>The HS code and origin country are confirmed at the quotation stage.</li><li>The cassation and quota status is checked per shipment period.</li><li>For products that need a permit, the application calendar is written before the shipment.</li><li>Customs cost is calculated on one plan together with the freight.</li></ul><h2>Frequently asked questions</h2><h3>Who runs the cassation check?</h3><p>The customs side can run it; the freight side also needs the status while planning the shipment. When the HS code and origin are shared at the quotation stage, the check is included in the freight plan.</p><h3>Does the shipment stop when the quota fills?</h3><p>Loading can happen, but a permit or an extra duty comes up at customs. When the quota period and volume are checked at the quotation stage, the plan is built either by the period or by the permit process.</p><h3>Which products need this check?</h3><p>An HS-based check is recommended for all imports; however, for products under tariff measures — textiles and steel, for example — the check should be treated as mandatory.</p><h2>Run customs and freight on one plan</h2><p>Share the product HS code, the origin country and the delivery window. Our team checks the cassation, quota and tariff status and calculates the customs cost on one calendar together with the freight plan.</p><p><a href="/en/customs-clearance/">Customs clearance service</a> &middot; <a href="/en/blog/incoterms-2020-which-term-covers-what/">Which Incoterms 2020 term covers what?</a></p>]]></content:encoded>
    </item>
  </channel>
</rss>