Air-freight charges are not always calculated from the kilograms shown on a scale. A light but bulky shipment can have a higher chargeable weight because of the space it occupies on an aircraft. That is why actual weight and volumetric weight need to be compared before requesting a quote.
The volumetric calculation uses the dimensions of the shipment after packing. This guide explains the formula, a worked example and the details to confirm with the carrier. The result is an estimate, not the final freight price: the carrier's tariff and service conditions still apply.
The volumetric-weight formula
Measure the packed length, width and height of each piece in centimetres. Multiply the three measurements to get cubic centimetres. Divide that volume by the volumetric divisor used by the carrier; the result is the piece's volumetric weight.
For example, a piece measuring 120 × 80 × 100 cm has a volume of 960,000 cm³. With a divisor of 6,000 cm³/kg, its calculated volumetric weight is 160 kg. This example illustrates the method only; the divisor or units can vary by route and service.
How chargeable weight is determined
Carriers commonly use the higher of actual weight and volumetric weight as the chargeable weight. If the example piece has an actual weight of 110 kg, the 160 kg volumetric figure could be used under the example divisor. If actual weight were 190 kg, that higher figure would apply instead.
For multiple pieces, provide the dimensions and weight of each one separately. Rounding and minimum chargeable-weight rules depend on the carrier. Do not treat your own calculation as a final quote; the carrier's inspection and measurement take precedence.
Check measurements before requesting a quote
Measure the shipment in its packed condition, not as an unpacked product. Pallets, protective corners, carton overhang and stretch wrap can increase the outside dimensions. For an irregular package, use its outermost length, width and height.
Share the origin and destination, piece count, packed dimensions, gross weight and cargo-ready date. State pallet dimensions separately where relevant. Providing the same complete data at the start reduces the chance that a later remeasurement changes the price or loading plan.
- Measure every piece separately after packing.
- Confirm the divisor and rounding rule with the carrier.
- Compare actual weight with volumetric weight.
- Attach a clear dimensions-and-weight list to the quote request.
Plan air freight around the shipment
When considering air freight, look beyond chargeable weight to the delivery date, flight schedule, transfers and service scope at destination. Once the carrier's measurement and acceptance rules are confirmed, different transport options can be compared on the same basis.

