A standard dry container is not suitable for every shipment. Temperature requirements, door clearance, top-loading needs or lashing conditions may lead to a reefer, open-top or flat-rack option.
Special-container selection is not made from the cargo type alone. Internal dimensions, door opening, payload limit, equipment availability on the route and loading and discharge options all need to be confirmed with the carrier. This guide provides a basic decision framework.
Reefer: when temperature control is required
A reefer container is used for cargo that needs defined temperature conditions during sea transport. State the product requirements, available temperature range and any ventilation needs in the quote request. Product pre-conditioning and packaging also form part of the operating plan.
A reefer does not automatically make every product's temperature suitable. Confirm carrier acceptance, equipment capacity and connections at origin and destination before the transport is booked.
Open top: when loading from above is needed
The removable roof of an open-top container can be considered where cargo needs to be loaded from above, for example by crane. Cargo height, whether it can pass through the doors and the method of covering and securing it affect the choice.
Top-loading does not mean the cargo is free from dimensional limits in every direction. Confirm cargo weight and height limits, availability on the service and the discharge method at the destination terminal.
Flat rack: for wide or heavy cargo
A flat rack can be assessed for cargo where side walls or a roof restrict the geometry, particularly for heavy or wide pieces. Technical review is needed for lashing points, weight distribution, lifting plans and stowage on the vessel.
For out-of-gauge cargo, route, port equipment, permits and handling conditions need to be reviewed independently of the container type. Use dimension tables as an initial check, then confirm the assigned equipment and operating plan.
- Share packed cargo dimensions and gross weight.
- State whether side, door or top loading is required.
- Explain temperature, lashing and lifting conditions.
- Confirm equipment availability at origin and destination.
Select equipment for both cargo and route
The right equipment follows from assessing cargo geometry, handling method, route and service availability together. Share drawings, photos and measurements at quotation stage to compare standard and special equipment options.

