Skip to content
ASELL Logistics

Comparison

FTL or LTL? Choosing the Right Road Freight Option

A comparison of FTL and LTL road freight across cost, transit time, equipment and risk. Whether to commit a full vehicle or share the load.

Full Truckload

FTL

The entire vehicle is dedicated to a single shipment. The vehicle does not pick up other cargo.

Less Than Truckload

LTL

Vehicle capacity is shared between several shipments. It is priced on the space occupied.

The choice between FTL and LTL road freight comes down to how much of the vehicle a shipment fills. The right selection affects both cost and delivery time.

With FTL the vehicle is entirely allocated to one shipment and does not carry other cargo on the way. With LTL the capacity is shared between several shipments on the same route.

The table below summarises the operational differences between the two options. The decision should combine shipment volume with delivery date, route regularity and the sensitivity of the goods.

Table of contents

Side by side

Key differences

The operational differences that determine which option fits your shipment.

CriterionFTLLTL
Vehicle useThe vehicle is fully allocated to one shipment.Capacity is shared between multiple shipments.
Unit costAdvantageous at high fill rates.Advantageous for small shipments.
Delivery timeDirect delivery; the vehicle carries nothing else.Consolidation and distribution on arrival add time.
Loading flexibilityThe vehicle is entirely empty at loading.Loading is planned by shipment volume and weight order.
How it worksA specific vehicle is hired in full.Transport is purchased on the space occupied.

Break-even point

8–12 pallets

A standard curtainsider is 13.6 loading metres long and takes 33 Euro pallets. The break-even on this lane usually sits around 8–12 pallets, which is 6–10 loading metres. Below it groupage is usually cheaper, above it a full truck is. The threshold is not one number but a band where two price curves cross, and it moves with the lane and the season.

What is a loading metre (LDM)?

Groupage is priced on the space you occupy, and the unit is the loading metre: one metre of deck length across the full width. A Euro pallet takes roughly 0.4 loading metres, an industrial pallet 0.5. The weight ratio per loading metre is about 1,750 kg. That ratio is not a law but a tariff convention and forwarders use slightly different values, so ask for it in writing in the quotation. If your goods are heavier than the ratio you pay by weight, if they are light and bulky you pay for the space.

Beyond the freight line

The charges that sit outside the freight rate

A cheap freight quotation can turn expensive once the destination charges are added. These are the lines to compare.

ChargeWhat it covers
Consolidation depot (CFS)The groupage shipment is collected at the depot, combined with other shipments and separated at the destination. That handling chain is built into the groupage price.
Loading metre ceilingMost carriers apply a maximum per shipment. Once the ceiling is reached, the consignment can be billed like a full truck because of the space it takes up.
Fuel and bridge tollsAdded to the freight line in road transport. They change with the route and the season.
Waiting for the full truckCollecting the cargo, filling the trailer and agreeing the loading slot all depend on the consolidator's calendar in groupage.

Worked examples

Three shipments, three different answers

The same two options produce different results once the cargo profile changes.

6 pallets, 2 tons

Six pallets take about 2.4 loading metres. Groupage is clearly cheaper than paying for a full truck. This is the typical band for regular small shipments.

16 pallets, 8 tons

Sixteen pallets take about 6.4 loading metres. Groupage may still win on price, but the cargo is handled at the consolidation depot and may wait for the trailer to fill. With a tight delivery window a full truck is the better answer.

30 pallets, 18 tons

You use about 88% of the trailer and pay roughly 90% of the full truck rate. Add the longer transit and the second handling of groupage and the full truck is clearly ahead. That is where the break-even sits.

Preparation

How to prepare for the option you pick

The option that needs more handling also needs more preparation. These steps reduce the risk that comes with it.

  • Palletise and wrap: groupage cargo is handled at least twice, at the consolidation depot and at the distribution centre.
  • Build stackable loads: pallets that cannot be stacked use more loading metres for the same weight.
  • Label and mark: every pallet carries the consignee name, the destination and the package number.
  • For ADR, temperature controlled and out of gauge cargo a dedicated vehicle is usually required; groupage options stay limited.

Choose this when

FTL

  • When the shipment largely fills the vehicle
  • When the delivery date is critical
  • When the load is irregular or needs special loading
  • When damage risk is high

Choose this when

LTL

  • When the shipment does not fill a vehicle
  • For regular but individually small shipments
  • When there is flexibility in the delivery date
  • When cost is the priority

Frequently asked questions

Questions about FTL and LTL

The questions that come up most often when choosing between these options.

What is the core difference between FTL and LTL?
With FTL the entire vehicle is allocated to one shipment and does not return empty. With LTL the capacity is shared between several shipments on the same route and the transport is priced on the space occupied.
Which option is more economical?
FTL is usually more economical when the shipment largely fills the vehicle, while LTL is more economical for small shipments. The net calculation needs the packaged volume, weight and destination.
Why does delivery time increase with LTL?
Shipments are first brought together at a consolidation centre, then separated and distributed by destination after the main leg. These extra steps add to the total time.
How is cargo damage prevented with LTL?
There is additional handling during consolidation and deconsolidation. Correct packaging, secure stacking and traceability all reduce the risk. If damage occurs, carrier liability is supported by cargo insurance.
How do I know whether my shipment suits FTL?
Compare the packaged volume and weight of your shipment with the capacity of the vehicle type you use. Once that measurement is available, FTL suitability becomes clear and the quote can be prepared for both options.

Related reading

Go deeper on this topic

Related services

Services for this comparison

We plan the mode, the equipment and the customs steps together, so the option you choose stays within one operating plan.

Quote & Planning

Let's plan the right solution for your cargo together.

Share your origin and destination and cargo details; our team will get back to you with the right transport mode and quote scope.

+90 544 337 99 48gul@asellogistics.com.trMonday – Friday, 09:00 – 18:00
Get a Quote Now