Skip to content
ASELL Logistics

Sea Freight

Which cargo suits a 40 ft FCL container?

Container choice is not only about volume. Load geometry, weight limits and stowage rules decide it as much.

Stowage plan of palletised cargo inside a 40 ft FCL container
Sea FreightASELL Logistics TeamNovember 17, 20265 min read
Share

A fully booked (FCL) 40 ft container stands out for its volume, yet the right choice goes beyond cubic metres. The cargo's dimensions, pallet layout, weight and stowage rules determine whether a 40 ft container is actually the best fit.

This article covers the dimensions and capacity of the 40 ft container, the cargo profiles that suit it, and what to weigh up when comparing it with a 20 ft container.

Dimensions and capacity of the 40 ft container

A standard 40 ft DC container has internal dimensions of roughly 12.03 m length, 2.35 m width and 2.39 m height. The door opening is a few centimetres narrower than the internal cross-section, so whether cargo fits through the door should be checked separately. Volume is about 67–68 m³ and the payload limit, depending on the container's tare weight, is roughly 26–27 tonnes.

For taller cargo, the 40 ft HC (High Cube) variant raises the internal height to about 2.69 m and the volume to almost 76 m³. For light but bulky cargo, the HC option carries more goods at the same freight rate.

Which loads fit a 40 ft container

Loads that run out of space before weight are the natural fit for a 40 ft container: textiles, furniture, footwear, household appliances, packaged consumer goods and light palletised industrial goods. Depending on the stowage pattern, about 24–25 standard EUR pallets (1.20 × 0.80 m) fit into a 40 ft DC.

Weight limits come from three places: the container's payload capacity, road and vehicle weight regulations in the origin and destination countries, and transit rules along the route. For dense cargo these limits can bite before the volume fills up. The cargo's centre of gravity also needs to stay balanced; weight concentrated on one side undermines handling and transport safety.

In sea freight, the verified gross mass (VGM) of the loaded container must be declared before the vessel departs. This figure is the sum of the container tare, cargo and dunnage, and it feeds the terminal's handling plan.

  • Plan cargo with its packed dimensions and pallet layout.
  • Check the door clearance, especially for wide and tall pieces.
  • Distribute weight evenly; keep the centre of gravity centred.
  • Add the pre-departure VGM declaration to the plan.

Compared with the 20 ft container

A 20 ft DC container offers about 33 m³ of volume with a payload capacity similar to the 40 ft. For dense cargo where weight fills the box before volume — metal products, bricks, paper reels, stone and the like — a 20 ft container is often the more efficient choice.

For light and bulky cargo the 40 ft container lowers the cost per cubic metre: since 40 ft freight is not double the 20 ft rate, the amount paid per m³ is generally more favourable. If your cargo exceeds 20 ft capacity but would not fill a 40 ft, it is also worth evaluating LCL instead of FCL.

How to move forward

Evaluating container choice together with your cargo's dimensions, weight and delivery profile clarifies both freight and handling cost. You can calculate your cargo's m³ with our volume calculator, see the recommended container fill, and confirm it with our team during the quotation stage.

ASELL Logistics

Sea, air, road and rail freight with customs clearance and warehousing solutions.

Get in touch

Quote & Planning

Let's plan the right solution for your cargo together.

Share your origin and destination and cargo details; our team will get back to you with the right transport mode and quote scope.

+90 544 337 99 48gul@asellogistics.com.trMonday – Friday, 09:00 – 18:00
Get a Quote Now