Skip to content
ASELL Logistics

Road Freight

How to measure palletized cargo: a checklist

When requesting a quote, share the outermost dimensions of the pallet rather than the product dimensions. A checklist for equipment selection and loading plans.

ASELL Logistics blog cover explaining pallet measurement and pre-shipment checks
Road FreightASELL Logistics TeamNovember 4, 20265 min read
Share

When requesting a quote, share the outermost dimensions of the shipment-ready pallet instead of the product dimensions. The difference between the two is sometimes a few centimetres, and sometimes it changes the equipment selection entirely.

The most common result of a wrong measurement is a different vehicle or container being assigned than planned. That means either an extra charge or a shipment that has to be re-planned. Working through the checklist below before you request a quote is the cheapest step in the whole process.

Measure the outermost points

Measurement starts from the outermost point of the packaging. Overhanging pallet boards, the bulge created by stretch wrap, corner protectors and any part of the cargo that extends beyond the pallet all count. The dimensions of a product inside a box are not the shipping dimensions of that box.

Write length, width and height separately and state which way the pallet will face during transport. If a pallet fits into a container lying on its side, the vertical measurement is below 2.30 metres and it can still be loaded; that detail is used directly in equipment planning.

If you use more than one pallet type, list each type separately. Giving a single average measurement per pallet misleads the plan. For carton-based shipments, state the carton count and how many of each size there are.

State gross weight and stacking

Weight information is not just the weight of the goods. Pallet, packaging, protective material and, where applicable, drums or crates are all included in the gross weight. Gross weight is used both in chargeable weight calculation and in the vehicle capacity check.

Stacking information directly affects the loading plan. If pallets cannot be stacked on each other, no second layer can be placed and the in-vehicle arrangement is built around that. Please also share the maximum stacking height the load can take.

Loading conditions are part of the plan too. Is there forklift access at the loading point, is there a ramp, will the vehicle be loaded from the side? A quote prepared without this information is an incomplete quote.

Flag special conditions separately

For temperature-controlled cargo, state the target temperature range. For humidity-sensitive goods, state the humidity limits. If dangerous goods are involved, specify the product class and the packaging standard used, so that ADR or IATA rules can be applied correctly.

Goods with a high customs inspection risk may need extra lead time for document preparation. Sharing these details at the quotation stage is what allows the plan to be built correctly from the start.

Confirm equipment clearance

You can compare your measurements against the equipment tables used in planning. Inner dimensions and door openings differ between standard, high cube and flat rack options; the dimension tables on our equipment page cover them.

However, dimension tables are a preliminary planning aid, not a commitment. The actual door clearance, capacity and loading method of the assigned vehicle must be confirmed at the quotation stage. For this reason, it helps to tell us how you measured.

The pallet type should also be decided alongside the measurement. The 120×80 cm and 120×100 cm euro pallets both exist, and each fits a different number of pallets per container. Container packing efficiency directly affects cost per cubic metre.

Where shipments follow a regular flow, standardising the pallet type shortens loading time and removes equipment suitability discussions altogether.

  • Measure the shipment-ready outer dimensions including packaging.
  • List each pallet type separately.
  • Gross weight includes pallet and packaging.
  • State stacking capability and loading access.
  • Equipment clearance is confirmed at the quotation stage.

Related content

ASELL Logistics

Sea, air, road and rail freight with customs clearance and warehousing solutions.

Get in touch

Quote & Planning

Let's plan the right solution for your cargo together.

Share your origin and destination and cargo details; our team will get back to you with the right transport mode and quote scope.

+90 544 337 99 48gul@asellogistics.com.trMonday – Friday, 09:00 – 18:00
Get a Quote Now